Qarma Support

Introduction Deleting inspections can be tricky. It all depends on if you wish only to delete one line, parts, or the whole order - and if the inspection ...

Introduction This guide will help you create a second inspection. A second inspection might be needed when the first inspection was rejected, and the insp...

Introduction The following is an overview of the meaning of the different status states in Qarma and their meaning. Planned inspection When the ...

Introduction If you want to reset an in progress inspection, reset function will help you. This guide will showcase how to reset an inspection. Res...

Introduction You can also reset the in progress inspections on the mobile phone 1. Find the inspection that you want to reset in ‘In progress’ tab. Cl...

Introduction If an order is shipped in multiple shipments, it is possible to split the inspection in Qarma as well. It can be done by the inspector in the ...

Defect Gallery From the dashboard in Qarma, on the Defects tab, it is possible to browse the images and reports supporting all the defects that have been r...

Introduction This guide will help you create a second inspection. A second inspection might be needed when the first inspection was rejected, and the inspe...

Introduction The following guide explains and visualizes how to find and use the box picker for an inspection. Note: the relevance of this feature is onl...

Introduction The following guide explains and visualizes how to find and duplicate an existing checkpoint. A checkpoint is defined by the checklist you a...