Introduction
The following guide explains and visualizes how to find and use the box picker for an inspection.
Note: the relevance of this feature is only to companies that store products in numbered boxes.
Box Picker
With Box Picker in the Qarma App, the system will random select which boxes to take out for inspection. That way factories or inspectors cannot influence the decision what boxes to pick. It is 100 precent system generated.
To find and use the box picker, follow these steps:
1. Open an inspection in the Qarma app and go to Order info at the top.
After heading over to the order info, a general overview of the product will appear with an option to click Randomize.
2. After clicking on the button Randomize, the following box will pop up
In this pop-up, you will have to determine the units per box and then click generate.
Now the box numbers will show up, and you will now know which boxes to check.
If any further questions or comments arise, feel free to contact our support, either through our guide or by email.